Pictures

Vertical Installation

PermaCrete's exclusive polymer cement surface provides an exterior coating of up to 6,000 PSI compressive and 1,800 PSI flexural strengths when applied in proper thicknesses. This unique surface also offers significant advantages over other coating products used to resurface building structures such as plaster, Dryvit, or reduced strength, synthetic stuccos. Those products usually contain little, if any, Portland cement and are primarily low-strength, non-sealed cosmetic coatings that provide less protection from weather erosion and other frequent surface abuses like staining, chipping or cracking.

PermaCrete's exterior finish provides a super strong surface that offers a more substantial brick-like protection. Available in virtually any color, texture or design, PermaCrete clearly offers the finest exterior surface available today for ICF block, concrete block, brick, poured concrete or concrete panel wall structures!


1. Apply Base Coat Spray on one coat of PermaCrete Matrix as a base coat to be used to embed the fiber mesh to the wall surface.	2. Apply PermaMesh Trowel in PermaMesh Fiber Cloth to bridge the ICF or concrete block seams and add flexural and tensil strengths.	3. Spray Over PermaMesh Spray another coat of PermaCrete Matrix over surface to fully cover PermaMesh.

4. Apply Top Texture Coat Spray final coat of colored PermaCrete Matrix onto surface for texture finish.	5. Trowel Desired Finish Trowel final texture coat to produce a lace, stucco or worm finish, or leave as is for a sand finish.	6. Spray Two Coats of Sealer Apply two coats of stain sealer over entire surface with roller or airless sprayer.

Quality Systems, Inc., owns all copyrights to this web site and its contents.
PermaCrete and PolarCrete are protected trademarks of Quality Systems, Inc.
Inquiries about copyrights and trademarks should be directed to Quality Systems, Inc.,
1101 Menzler Road, Nashville, Tennessee 37210 1-800-607-3762